Eaton 5P 1550i VA Tower (5P1550i) – Eaton’s Power Quality

5P1550i
Eaton 5P 1550i VA Tower

General
Topology Line-Interactive High Frequency (Pure Sinewave, Booster + Fader)
Configuration Tower
Part Number 5P1550i
Rating (VA/Watts) 1550/1100
Dimensions (H x W x D, mm) 230 x 150 x 445
Weight (kg) 15.6
Warranty 3 years on electronics, 2 years on batteries

Electrical Input
Connection
(1) IEC-320-C14
IEC C14
Input Voltage Without Using Batteries 160V-294V (adjustable to 150V-294V)
Input frequency Range Without Using Batteries 47 to 70Hz (50 Hz system), 56.5 to 70Hz (60 Hz system), 40Hz in low-sensitivity mode

Electrical Output
Voltages 230 V (+6/-10 %) (Adjustable to 200V / 208V / 220V / 230V / 240V)
Outlets
(8) IEC-320-C13
IEC C13
Remotely controlled sockets 2 groups of 2 x IEC C13 (10 A)
Output Frequency 50/60 Hz +/- 0.1 % (autosensing)

Battery
Runtime
(Minutes)
2004006008001000
0102030405060708090
Standard Runtime
Load (Watts)Battery runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc. Actual runtime may vary from +/- 15% around these typical values
Hover over graph for detailed runtime values
Battery Management ABM® or constant voltage charging method (user selectable), automatic battery test, deep discharge protection

Communications
Communication Ports 1 USB port + 1 RS232 serial port and relay contacts (USB and RS232 ports cannot be used simultaneously), 1 mini-terminal block for remote ON/OFF and Remote Power Off
Communications Card Slots 1 slot for Network-MS card, ModBus-MS or Relay-MS cards

Environmental & Standards
Audible Noise 40 dBA
Operating Temperature 0 to 40°C
Safety markings IEC/EN 62040-1, UL 1778
EMC Markings IEC/EN 62040-2, IEC/EN 62040-3 (performance)
Approvals CE, CB report, TÃœV

Additional information