The Cisco ASR 9001-S Router is a compact, high-capacity provider edge router that delivers 60 Gbps of nonblocking, full-duplex fabric capacity in a two-rack-unit (2RU) form factor. The Cisco ASR 9001-S router can be upgraded to deliver 120 Gbps capacity by applying for an upgrade license. Because it is based on the same Cisco IOS XR Software image as other routers in the Cisco ASR 9000 Series, the Cisco ASR 9001-S Router delivers the same features and services found on the Cisco ASR 9000 Series platforms, which allows service providers to standardize on the same Cisco IOS XR image. The Cisco ASR 9001-S Router has an Integrated route switch processor (RSP) and two modular bays that support 1, 10, and 40 Gigabit Ethernet modular port adapters (MPAs).
| ASR 9001-S | Specifications |
| Integrated interfaces | 2 x 10 Gigabit Ethernet SFP+ by default; the remaining 2 x 10 Gigabit Ethernet SFP+ ports can be activated by applying for licenses |
| Modular port adapters | 20 x 1 Gigabit Ethernet, 2 x 10 Gigabit Ethernet, 4 x 10 Gigabit Ethernet, and 1 x 40 Gigabit Ethernet |
| Redundancy | Power supply redundancy |
| The Power supply part number | ● A9K-750W-AC
● A9K-750W-DC |
| Physical specifications | ● Height: 3.472 in. (88.2 mm)
● Width: 17.42 in. (442 mm) ● Depth: 18.5 in. (470 mm) ● Weight of chassis: 30.2032 lbs (13.7 kg) ● Weight of chassis with two MPAs: 36.37623 lbs (16.5 kg) |
| Power inputs | ● Worldwide ranging AC (90-265V; 50-60 Hz)
● Worldwide ranging DC (-40V to -72V) |
| Power consumption | 375 W typical, 425 W maximum |
| Environmental conditions | ● Operating temperature: 32 to 104°F (0 to 40°C)
● Storage temperature: -40 to 167°F (-40 to 75°C) ● Relative humidity: 10 to 90%, noncondensing ● Regulatory compliance |
| Environmental Specifications | |
| Operating temperature (nominal) | 41 to 104ºF (5 to 40ºC) |
| Operating temperature (short-term) |
23 to 131ºF (-5 to 55ºC) |
| Operating humidity (nominal) (relative humidity) | 10 to 85% |
| Operating humidity (short-term) |
5 to 90% Note: Not to exceed 0.024 kg water or dry air |
| Storage temperature | -40 to 158ºF (-40 to 70ºC) |
| Storage (relative humidity) | 5 to 95% Note: Not to exceed 0.024 kg water or dry air |
| Operating altitude | -1800m |
| Air flow | Side to side |
| Compliance | |
| Network Equipment Building Standards (NEBS) | Cisco ASR 9001-S is designed to meet:
● SR-3580: NEBS Criteria Levels (Level 3) ● GR-1089-CORE: NEBS EMC and Safety ● GR-63-CORE: NEBS Physical Protection ● VZ.TPR.9205: Verizon TEEER |
| ETSI standards | Cisco ASR 9001-S is designed to meet (qualification in progress):
● EN300 386: Telecommunications Network Equipment (EMC) ● ETSI 300 019 Storage Class 1.1 ● ETSI 300 019 Transportation Class 2.3 ● ETSI 300 019 Stationary Use Class 3.1 ● EN55022: Information Technology Equipment (Emissions) ● EN55024: Information Technology Equipment (Immunity) ● EN50082-1/EN-61000-6-1: Generic Immunity Standard |
| EMC standards | Cisco ASR 9001-S is designed to meet:
● FCC Class A ● ICES 003 Class A ● AS/NZS 3548 Class A ● CISPR 22 (EN55022) Class A ● VCCI Class A ● BSMI Class A ● IEC/EN 61000-3-2: Power Line Harmonics ● IEC/EN 61000-3-3: Voltage Fluctuations and Flicker ● EN 50121-4: Railway EMC |
| Immunity | Cisco ASR 9001-S is designed to meet:
● IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air) ● IEC/EN-61000-4-3: Radiated Immunity (10V/m) ● IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal) ● IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM) ● IEC/EN-61000-4-5: Signal Ports (1kV) ● IEC/EN-61000-4-5: Surge DC Port (1kV) ● IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms) ● IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m) ● IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations ● EN 50121-4: Railway EMC |
| Safety | Cisco ASR 9001-S is designed to meet:
● UL/CSA/IEC/EN 60950-1 ● IEC/EN 60825 Laser Safety ● ACA TS001 ● AS/NZS 60950 ● FDA: Code of Federal Regulations Laser Safety |
Mtech helps ensure that performance and scalability are addressed and optimized. We will analyze your storage and networking needs, design a strategy to address your unique business requirements, and implement a complete solution using Cisco products which can be delivered to UAE (Dubai, Abu Dhabi, Sharjah, Ajman, Al Ain, Ras Al-Khaimah, Fujairah) and other countries in the world in Asia, Africa, USA, Europe and GCC, such us: Oman, Qatar and Bahrain, Saudi Arabia, Iran, Iraq, India, Pakistan, German, Spain, Mali, Nigeria, Uganda, Ghana, Sudan, Ethiopia, Tanzania, Somalia, Rwanda, Congo, Egypt, Libya, Algeria, Morocco, Africa, and many countries.
For the best, Cisco Routers and competitive prices call +9714323 6970 | +97142325256
You must be logged in to post a review.
We track vendors prices daily but if you do find the same product cheaper, we'll match the price for you.
Mtech (Al Masaood Technology Services) was founded in 2010 as a division of Al Masaood Group to be a leading technology distribution Over UAE / GCC and act as the Information and Communication Technology (ICT) distributor of choice for the esteemed partners across the portfolio. As the leading distributor of quality IT products to the Middle East, M tech extensive portfolio includes leading global brands reaching out to over 2,500 resellers throughout the MENA region.
Tel: +9714323 6970 |+97142325256
Email: info@mtech-services.com
Reviews
There are no reviews yet.